R33 GTR Cup Holder/Tray
**If you have an RWD skyline (GTST/GTS), there is a different tray made for your car currently available. This tray will also fit your car however this version is much shallower than the GTST/GTS tray as there is no G Sensor module on those models**
Made for Nissan Skyline R33 GTR. This product directly replaces the factory tray that, as we all know, doesn’t hold any drinks or your phone properly. Simply unclip the stock piece and clip this new part in and you’re done. This tray will not interfere with your G Sensor module located under the armrest. With an OEM quality finish, there is no compromise of cheap parts that will ruin the look of your interior. This new product has a much larger and deeper storage space which can hold drinks much easier as well as additional space for other things you may want to store. This product completely transforms an unusable space into a properly convenient piece of storage. It has a 60mm depth at the deepest front section, 40mm at the top pocket and 20mm at its shallowest point. The cupholder is modelled to fit Starbucks cups as well as soft drink can sizes. This is a no brainer, immediate upgrade over the stock piece! And if you ever want to change it back you just unclip this product and clip your old one back in, will not affect the purity of the skyline as these are very quickly becoming collectables.
The options available are as follows:
Cup Holder. This option with the drink holder in the front and the pocket at the back.
2 Part Tray. This option is for those who don’t need a secure cupholder but still want maximum storage space that Nissan wasn’t kind enough to supply from factory. It will still fit drinks in there but they may not be as stable as its a square space instead of a round space.
Cup Holder/2 Part Tray Custom Logo. This option is for the insert you desire however wish to change to your own custom logo or change things around a little. If you would like to further modify the design of the insert, this is also available but best option would be to email us directly with your request and we will be able to accommodate you.
**If you have an RWD skyline (GTST/GTS), there is a different tray made for your car currently available. This tray will also fit your car however this version is much shallower than the GTST/GTS tray as there is no G Sensor module on those models**
Made for Nissan Skyline R33 GTR. This product directly replaces the factory tray that, as we all know, doesn’t hold any drinks or your phone properly. Simply unclip the stock piece and clip this new part in and you’re done. This tray will not interfere with your G Sensor module located under the armrest. With an OEM quality finish, there is no compromise of cheap parts that will ruin the look of your interior. This new product has a much larger and deeper storage space which can hold drinks much easier as well as additional space for other things you may want to store. This product completely transforms an unusable space into a properly convenient piece of storage. It has a 60mm depth at the deepest front section, 40mm at the top pocket and 20mm at its shallowest point. The cupholder is modelled to fit Starbucks cups as well as soft drink can sizes. This is a no brainer, immediate upgrade over the stock piece! And if you ever want to change it back you just unclip this product and clip your old one back in, will not affect the purity of the skyline as these are very quickly becoming collectables.
The options available are as follows:
Cup Holder. This option with the drink holder in the front and the pocket at the back.
2 Part Tray. This option is for those who don’t need a secure cupholder but still want maximum storage space that Nissan wasn’t kind enough to supply from factory. It will still fit drinks in there but they may not be as stable as its a square space instead of a round space.
Cup Holder/2 Part Tray Custom Logo. This option is for the insert you desire however wish to change to your own custom logo or change things around a little. If you would like to further modify the design of the insert, this is also available but best option would be to email us directly with your request and we will be able to accommodate you.
**If you have an RWD skyline (GTST/GTS), there is a different tray made for your car currently available. This tray will also fit your car however this version is much shallower than the GTST/GTS tray as there is no G Sensor module on those models**
Made for Nissan Skyline R33 GTR. This product directly replaces the factory tray that, as we all know, doesn’t hold any drinks or your phone properly. Simply unclip the stock piece and clip this new part in and you’re done. This tray will not interfere with your G Sensor module located under the armrest. With an OEM quality finish, there is no compromise of cheap parts that will ruin the look of your interior. This new product has a much larger and deeper storage space which can hold drinks much easier as well as additional space for other things you may want to store. This product completely transforms an unusable space into a properly convenient piece of storage. It has a 60mm depth at the deepest front section, 40mm at the top pocket and 20mm at its shallowest point. The cupholder is modelled to fit Starbucks cups as well as soft drink can sizes. This is a no brainer, immediate upgrade over the stock piece! And if you ever want to change it back you just unclip this product and clip your old one back in, will not affect the purity of the skyline as these are very quickly becoming collectables.
The options available are as follows:
Cup Holder. This option with the drink holder in the front and the pocket at the back.
2 Part Tray. This option is for those who don’t need a secure cupholder but still want maximum storage space that Nissan wasn’t kind enough to supply from factory. It will still fit drinks in there but they may not be as stable as its a square space instead of a round space.
Cup Holder/2 Part Tray Custom Logo. This option is for the insert you desire however wish to change to your own custom logo or change things around a little. If you would like to further modify the design of the insert, this is also available but best option would be to email us directly with your request and we will be able to accommodate you.
NOTICE:
Currently not taking any more orders for 3D printed products as I am in the process of making these products even better with higher quality materials and details. I will also be able to produce these products at a higher rate which cuts down production time. Thanks for your patience, feel free to contact us if you would like to know more.
Shipping:
This product is made to order, please allow 1-2 weeks for dispatch. If there is a significant delay we will be in contact with you to advise. If you purchased the custom logo version we will be in contact with you to fulfil your request.